need specs on stock d16a6
Thread Starter
Joined: Aug 2003
Posts: 1
Likes: 0
From: zeyperhills, fl, us
need specs on stock d16a6
want some basic stock specs on d16a6 si and how much the specs might have changed after adding gude head shaved,jg cam,aem adj cam gear,header,intake and if there are any other mods without taking the motor apart
Junior Member
Joined: Mar 2002
Posts: 691
Likes: 0
Re: need specs on stock d16a6 (yaaamannn)
Displacement: 1590cc
Factory rated horsepower: 108hp (@6K I think)*
Factory rated torque: 100 ft/lbs (@5K I think)
USDM cars it came in:
88-91 CRX Si
89-91 Civic Si
90-91 Civic EX
*88 CRX-Si had a milder cam, was rated 105hp same torque.
Can't comment on what those mods will do, but search the EF forum there was a thread from a CRX dyno day, about a third of them were D16A6's.
Other mods without going internal? Lite flywheel, underdrive alternator pulley, overbore throttle-body,... low boost (6psi) supercharger?
Factory rated horsepower: 108hp (@6K I think)*
Factory rated torque: 100 ft/lbs (@5K I think)
USDM cars it came in:
88-91 CRX Si
89-91 Civic Si
90-91 Civic EX
*88 CRX-Si had a milder cam, was rated 105hp same torque.
Can't comment on what those mods will do, but search the EF forum there was a thread from a CRX dyno day, about a third of them were D16A6's.
Other mods without going internal? Lite flywheel, underdrive alternator pulley, overbore throttle-body,... low boost (6psi) supercharger?
Thread
Thread Starter
Forum
Replies
Last Post
