i dotn understand what the markings mean on the str cam gears 570 pro

theres no numbers just a lot o flines that dotn seem to match up to anythign lol

help please
thanks

 

the lots of lines you are referring to is probably the adjustment place that tell you where the cam gear is set at, make sure they are at zero before you install them

 

well there at zero now...the lines arnt like other cam gears were one tick is 2 degress or sometihgn
ill get a pic up soon

 

Each line is its own timing mark 1 is 1 and 2 is 2.

Take the line on the outer, example 2 over from zero, do the same thing on the inner(2 over from zero) align those two marks, you have just adjusted the gear two degrees. also check out this diagram, it makes it a littel easier to understand. Ifyou have any other qwuestions please let me know.

http://www.bdlind.com/oli.htm then click on adjusting the timing

 

Are they possably set up like the new Golden eagle cam gears ? if so they have instructions on there web site, might wann check it out to see..

 

the link bdl posted worked fine .....once i saw in the pics its a very good way to do it ...no more 10 degress clumped up in a half an inch spot