this car is a nightmare....the car has ls vtec and it is smoking like a train....i have changed.....the headgasket,valve seals,and the head was resurfaced .it has the plug in the head.im running out of ideas can u guys help me out

 

where is the smoke coming from...u might have bad rings...do a leakdown check for a positive answer..good luck

 

i have changed blocks and it has done the same thing.....one of the blocks was brand new rebuild

 

where is the smoke coming from...who did the work...it could be improper installation..there shouldnt be smoking with a freshly rebuilt block with new valve seals,headgasket,and resufacing of the head...have u done a compression or leakdown test yet?

 

no not yet

 

ttt

 

Bad install job.

 

how is that

 

dude think of it...u say that it is a freshly built block...so rule that out...u also say that the head has been resurfaced..u changed the valve seals...and changed the head gasket..so rule out the top end...u probablyy messed up somewhere...if ur worried about the block and head having imperfections, spray the headgasket with copper spray next time...

ive already asked u twice but still no answer...where is the smoke coming from? if u would actually supply some more info it would make diagnosing ur problem a lot easier..

 

its coming from the exhaust and its smells like oil....

 

just did a compression test.... and the rings are good

 

I have a feeling that you or your mechanic sucks and it's your head gasket.

 

u sure u replaced the valve seals...or are u just saying that...white smoke out ur exhaust is valve seals...maybe u fucked up when installing them...

 

thats funny.... the head gasket was changed and the problem was still there

 

Which head gasket did you use? LS or VTEC?

 

r u sure ur valve seals were installed properly?

 

cometic hybrid head gasket...and yes the seals are done right