So I bought a wire harness that was "tucked" ready. He said he had the harness in his car and ran fine but when throwing it in my 96 dx injectors would not pulse. Got fuel going from filter to rail but fuel wasnt coming out the injectors, has slight spark but wont turn over. Checked the starter have a dead starter but still injectors wont pulse. Tried the ground at the thermostat housing to a different ground still didnt. I dont have the money for a legit tuck hsrness. No multimeter so if someone can help i would greatly appreciate it

 

What car did it come out of? Why was he selling it in the first place? Is it a home done harness or something like a Rywire?

No one is going to be able to help you with a custom harness as no one knows how it was customized.

 

Nothing was cut it was just reloomed. Came out of a 97 dx.

 

Curious. Did you see it in a running car? All you can do is double check every wire in the harness. I've seen too many threads with tucks where the car had pins not seating in connectors properly.

 

was running, i double checked all the pin by pushing it in the plugs and it sat just fine. cant figure it out getting me stumped, need to get the car running