crxtc_vtec

iTrader: (2)

Picked up a harness, guy said that all he cut were the injectors off, but i noticed upon getting home and actually getting to work, that he hacked a little more that what he said, and I can't for the life of me think of what goes here, Im a little rusty , so im turning to you guys for help!! What goes at the end of the harness after the injectors towords the driver side?!? This little **** has me stumped and may prevent me from going to TX2k13!

grumblemarc

iTrader: (4)

Wait. This is what you bought or is this what you're trying to connect to the rest of the harness?

XREDLINE2

it looks to be the evap control ( sensor mounted on fuel rail)

what color are the wires??

crxtc_vtec

iTrader: (2)

I bought the harness like this, all i did was wire in my obd1 injector clips, and i cant think what goes on that end, I'll have to check for sure what the colors are when I get to the shop after work, I'm pretty irritated about it lol

XREDLINE2

im 99 % sure thats what it is i have a few em1 harnesses lying around give me a few

crxtc_vtec

iTrader: (2)

Thanks for the help broski!

XREDLINE2

no prob

XREDLINE2

no prob

XREDLINE2

yea look like its the evap solonoid if the wires are red/yel stripe & blk/yel stripe thats what it is

crxtc_vtec

iTrader: (2)

Cool, ill check that when i get to the shop after work!