NEED HELP!!!!
Thread Starter
BANNED
Joined: May 2005
Posts: 828
Likes: 0
From: behind my 12 gauge
NEED HELP!!!!
just got my motor back from machine shop...put it in the car...did everthing i suppose to do...plug everthing up...and start the car,oil shot out the back of the block...dont know where did it come from,but looks like it came from around the oil filter area........id check the oil filter and it was tighten...check the fitting for my oil presure gauge and it was ok...i dont know if theres any hose in the back of the block that i diddn't hook up right or plug in far enough...but those are the only things i know the oil run through...i dont know if the machine shop tighten the thing that the oil filter sits on(i forgot what it call)...any suggestion may help... 
Honda-Tech Member
Joined: Apr 2002
Posts: 7,574
Likes: 6
From: Cincinnati,, Oh
Re: NEED HELP!!!! (turbochargeb18c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbochargeb18c »</TD></TR><TR><TD CLASS="quote">...i dont know if the machine shop tighten the thing that the oil filter sits on </TD></TR></TABLE>
Pull the oil filter off to check. You might find an extra oil filter gasket too.
Pull the oil filter off to check. You might find an extra oil filter gasket too.
Thread
Thread Starter
Forum
Replies
Last Post