is there a diy thread for installing an msd 6al blaster ss coil and msd cap and rotor onto an obd1 ls motor? any help is apreciated

 

ttt

 

http://www.msdignition.com/uploadedF...uctions(1).pdf

Scroll to the bottom to where the diagrams are titled "honda ignitions." I believe this comes with the MSD box.

 

i was searching this too and found the same thing.


in short dude,

heres a break down of it.

thick red and black wires on opposite site of box - positive/negative to battery.

orange / black - black - negative / orange - positive (on external coil)

thin red- splice into black/yellow wire
thin white - splice into blue/white wire (or which ever wire it is for your OBD) itl be in the same plug as the black/yellow wire. only 2 wires.