i have a MSD distrubuter cap and rotor with a ss blaster coil. i had it uninstalled by a friend and is gone i wanted to hook it back up. i understand the whole putting the cap and rotor on and the wire to the extrnal coil pack. there are 2 brass fittings on the side is there wires that need to be hooked up. i have no idea from this point if anyone has done this or knows how give me a shout.

 

The brass terminnals should have "+" and "-" signs on them. I had to extend the wires that go to the coil inside my Honda distributor (I removed that coil as it was no longer necessary) to the MSD external coil.