Motor smokes on cold start
05-08-2016, 06:10 AM
#1
B*a*n*n*e*d
Thread Starter
Join Date: Aug 2013
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Motor smokes on cold start
Hello,
I have a b18c type r motor and about 2 weeks ago it started smoking(blue=oil)on cold start. So first thing I did was compression test and 1cyl=215, 2 cyl=210, 3cyl= 218, 4cyl= 220. That showed me that all the cylinders were well within spec of each other, so I replaced the pcv and valve seals. But I still get blue smoke on cold start, smokes for about a minute and then goes away. Is there any further testing I can do to pinpoint exactly the issue?
I have a b18c type r motor and about 2 weeks ago it started smoking(blue=oil)on cold start. So first thing I did was compression test and 1cyl=215, 2 cyl=210, 3cyl= 218, 4cyl= 220. That showed me that all the cylinders were well within spec of each other, so I replaced the pcv and valve seals. But I still get blue smoke on cold start, smokes for about a minute and then goes away. Is there any further testing I can do to pinpoint exactly the issue?
Thread
Thread Starter
Forum
Replies
Last Post
AgentJam
Tech / Misc
1
12-21-2004 07:36 AM