What is the length of bolts #20 and 22?

 

Bump, need measurements to help complete gen2 project

 

I also need to know the lengths of A, B and C. My engine shop is welding the broken motor mounts on my project B18C1 and needs to put studs in.

 

come on tech guys. they cant fix my block without this information!

 

Go to honda and ask to see the bolts. That would be your best bet. Good luck.

 

They're stupid. They pull the bolt sizes from the same place I am, it just lists a part number not dimenstion.

 

In Diagram C:
Bolt B is 12 x 1.25mm (43 ft-lbs)
Bolts C are 14 x 1.5mm (86.8 ft-lbs)

In Diagram B:
Bolts H are 12 x 1.25 mm (61 ft-lbs)

In Diagram A:
err...I'm not sure on this one. If you take a picture, I'm sure you can take it to Acura and they might be able to tell you.

I'm not entirely sure if this is the info you wanted. But hope it helped anyway.

 

Thank you but 12 and 14 is the head not the length.

 

got a wrench?

remove one at a time on your block, then measure them and the thickness of the bracket as well... one at a time will be okay.

I have them all laying around, I can measure them tomorrow if need be.

 

Why not just buy the damn bolts from honda??

 

I will tell you what you need to know, but first I'll need to see some specs for this diagram:

 

I cant buy the bolts from acura the mounts on the block are broken, they have to be welded and a stud has to be inserted. the stud has to be roughly the same legnth as the original bolt.

Owen can I just come over to your house and get some rough measurements?


[Modified by Muckman, 12:22 PM 3/22/2003]

 

The 12 and 14 are the thickness of the bolt in mm and the 1.25 and 1.5 in the type of thread that the bolts, but he does says the how long they are.

 

YAH,