Wazup

i was just wondering if anyone has used carbs on their motors... i know theyre mostly used on d-series motors, but can they be used on b-series motors? i did a search and i looked on dseries.org.. cant find anything...

b20guy

i used a mikuni side draft in my rx7 days

Ash J. Williams

knew someone with a dual webber carb B16 on TWM manifold. had very prepped engine. carbs when tuned, are great, but dual sidedrafts are esentially four carbs, kind of hard to tune. i had tripple mikunis on my zcar. those carbs sound GREAT, with header, and nice exhaust system, most carb'ed engines ressemble motorcycle engine as they wind up.
stan

Katman

yes it's possible to run carbs on a B-series VTEC engine. Although for vtec to work you'll need activate with an RPM switch or manual switch...


[Modified by Katman, 7:26 PM 8/1/2002]

dirtySOHC's

my dad had mikuni side drafts in his old HYBRID toyota truck.....lol

that thing screamed.....i wonder wat they sound like on a honda.....

01PYITR

I still have my Dellorto 45s in the garage if anyone is interested in them for a RX7 also have Racing Beat intake upper and lower.

JaeOne3345

i think with this soch motor im building im gonna run dual 44 mikunis..or dual 40 webers...non vtec motors on carbs=

the person i know running carsb retains his ecu simply for start up..

the dope thing about jets is the tuning parameters
no electronics to hold u back..just raw tuning


[Modified by JaeOne3345, 7:50 AM 8/2/2002]

Wazup

thanks for the replies... who sells mikuni carbs and how much do they usually run for?

JaeOne3345

mikuni sidedrafts like u want arent made anymore..or arent shipped to the states..find em used...webers are much more expensive. twm makes manifolds. who do u know running carbs?

Ash J. Williams

you can look into zcar aftermarket suppliers, or junk yards with wrecked 240z. believe it or not i did see two zcars with tripple carbs (believe they were webbers) in a junk yard here in LA, that was back 96. look around.
good luck
top-end might be able to help her in northridge
http://www.zcarperformance.com/
or motorsports auto in orange
http://www.zcarparts.com/


[Modified by 90crxsi, 2:02 AM 8/2/2002]

kinesistech

I used to have an 84 crx with a zc. I had a PYR head, dc header, 44 mikunis, and a 2.25 exhuast. That thing hauled *** like an all girls school bus.

Damn, thanks for the memories.

BTW I used to see my setup often in the '90s and webers made more power.


[Modified by kinesistech, 11:40 AM 8/2/2002]

.Beaver

What would a B18B be like with webers on it?

JaeOne3345

it would ****** rip...
back before RS motorworks was using the vtec lock out/b16a head skeleton motor..they rocked a carbed ls...11 seconds all day errday loc

Wazup

b18b sounds nice, but better yet a b20b would probably pull harder..

Cat

carbs??

carl_aka_carlos

yeah...carbs....ya know...how engines used to mix air and fuel before EFI...?

funny story...I was at an autoX last year...and there was an absolutely beautiful Z car with triple webbers...thing was fast!! well, he had the hood up and I was admiring the engine and some kids (read: 16-18) walked up, looked at the engine, pointed to the carbs, and asked me 'what are those?' I couldn't help but chuckle

zojirushi

Hey, i've got a prelude 2.0s with a b20a3, carburated. If anyone can help me make more power in the motor, and have any info i may be interested please privately message me. I'm very interested in this honda carb motor. 2.0 L of displacement, with the right setup, would prolly haul ***. Sounds good to me

crxfanatic

Carbs rock. Mikunis aren't around much anymore, Webers are easy to get. Check out http://www.piercemanifolds.com and http://www.twminduction.com for everything you should need.

TREVER

I had a 88 hf with a zc and Mikuni's.
I had to sell the car but the motor is still in my garage.
someday I'll get another ef to put my motor in.
One of the funnest cars to drive I ever had.


[Modified by TREVER, 9:10 AM 8/5/2002]

Bontke

My experience with carbs has been with my 74 RX-4 wagon. I had mikunis and I hated them. Never could get the setup to run correct, I switched to Webbers and those are bred to race. I was much happier. Amongst the RX7 community a majority like the webbers. I have switched to a haltec with webber type throttle bodies. Nothing beats fuel injection.

AllMotorMadness

My friend did a nitrous with carbs setup on a B-series gsr motor.......ran 11.00@1xxmph at palmdale all day long here is the link to see some pix's.....it's the only hatchback in there scroll down to the picture: http://piercemanifolds.com/yourwebers.htm

.Beaver

Do any of you guys know any sites that sell webers? looking for a set for my future B18B

Ash J. Williams

read the entire thread mate!
stan

.Beaver

i've been to all of the sites listed and they all either:
A. have no prices listed
B. sites are nightmares to nav
C. i don't live in cali
......n00b

Ash J. Williams

do a search, ********, google is your friend, and if you actually look thru the sites, top-end has a link to redline weber, which inturn has a price list. the dual weber set-up with the mani is about 1500US.
i might have little amount of posts here, but i'm no noob.
cheers
stan