LSD--need HELP!!!
Thread Starter
Member
Joined: Nov 2003
Posts: 1,024
Likes: 0
From: sex 2 sex, CA, U.S.A.
LSD--need HELP!!!
hav a JDM Y21 (B16) HYDRAULIC TRANNY...im lookin into buyin a 2000 JDM OEM ITR LSD!!! the ITR LSD doesnt come w/ final drive nor bearing...
my questions are:
1.)would the ITR LSD fit on my JDM Y21 tranny?
2.)can i use the final drive and bearing on my JDM Y21 to bolt on to the ITR LSD?
3.)IF THE LSD DONT FIT, which oem lsd would i need for my JDM Y21
tranny?
4.)IF THE LSD DOES fit but needs a different final drive and bearing, which
final drive and bearing do i need?
5.)is their any other parts, modification or procedure i need to install the lsd?
ANY ADVISE, COMMENTS, SUGGESTION OR OPINION IS WELCOME!!!
and yes ive searched already and i only found 1 thread about it but wasnt really as helpfull!!!
this is the thread:
https://honda-tech.com/zerothread?id=1160661
my questions are:
1.)would the ITR LSD fit on my JDM Y21 tranny?
2.)can i use the final drive and bearing on my JDM Y21 to bolt on to the ITR LSD?
3.)IF THE LSD DONT FIT, which oem lsd would i need for my JDM Y21
tranny?
4.)IF THE LSD DOES fit but needs a different final drive and bearing, which
final drive and bearing do i need?
5.)is their any other parts, modification or procedure i need to install the lsd?
ANY ADVISE, COMMENTS, SUGGESTION OR OPINION IS WELCOME!!!
and yes ive searched already and i only found 1 thread about it but wasnt really as helpfull!!!
this is the thread:
https://honda-tech.com/zerothread?id=1160661
Honda-Tech Member
Joined: Nov 2004
Posts: 2,577
Likes: 0
From: Tecks-us
Re: LSD--need HELP!!! (jdm_23_eg6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_23_eg6 »</TD></TR><TR><TD CLASS="quote">my questions are:
1.)would the ITR LSD fit on my JDM Y21 tranny?
2.)can i use the final drive and bearing on my JDM Y21 to bolt on to the ITR LSD?
3.)IF THE LSD DONT FIT, which oem lsd would i need for my JDM Y21
tranny?
4.)IF THE LSD DOES fit but needs a different final drive and bearing, which
final drive and bearing do i need?
5.)is their any other parts, modification or procedure i need to install the lsd?</TD></TR></TABLE>
1) yes, it will physically fit with the changing of 2 other parts
2) you CAN use the bearings from you tranny, but shouldn't EVER. and you'll need to change the ring gear and countershaft to a GS-R or ITR 4.40 set. those two parts only need to be changed.
3) ITR, CTR, SiR-G, etc. basically any OEM hydro B-series LSD are all the same, and require the same parts stated in 2)
4) already been there
5) already been there
1.)would the ITR LSD fit on my JDM Y21 tranny?
2.)can i use the final drive and bearing on my JDM Y21 to bolt on to the ITR LSD?
3.)IF THE LSD DONT FIT, which oem lsd would i need for my JDM Y21
tranny?
4.)IF THE LSD DOES fit but needs a different final drive and bearing, which
final drive and bearing do i need?
5.)is their any other parts, modification or procedure i need to install the lsd?</TD></TR></TABLE>
1) yes, it will physically fit with the changing of 2 other parts
2) you CAN use the bearings from you tranny, but shouldn't EVER. and you'll need to change the ring gear and countershaft to a GS-R or ITR 4.40 set. those two parts only need to be changed.
3) ITR, CTR, SiR-G, etc. basically any OEM hydro B-series LSD are all the same, and require the same parts stated in 2)
4) already been there
5) already been there
Thread
Thread Starter
Forum
Replies
Last Post
