Honda-Tech - Honda Forum Discussion

Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

LS/VTEC rods

Thread Tools
 
Search this Thread
 
Old Aug 26, 2002 | 01:37 PM
Share
  #1  
WONG FRIED RICE's Avatar
WONG FRIED RICE
Thread Starter
Junior Member
 
Joined: Mar 2001
Posts: 648
Likes: 0
From: BAY AREA, ca, usa
Default LS/VTEC rods
which rods should i use for a LS/VTEC? i have CTR pistons....just need to know which rods would be best
Reply
0
Old Aug 26, 2002 | 01:52 PM
Share
  #2  
Spade's Avatar
Spade
Honda-Tech Member
 
Joined: Aug 2001
Posts: 15,369
Likes: 3
From: Redwood City, Ca
Default Re:
Which would be best?

Eagle.
Reply
0
Old Aug 26, 2002 | 02:56 PM
Share
  #3  
Rocket's Avatar
Rocket
B*a*n*n*e*d
 
Joined: Mar 2002
Posts: 7,765
Likes: 1
Default Re: Re: (Spade)
You can't use Eagles unless you machine grooves for the pin locks/clips into the CTR pistons.
Reply
0
Old Aug 26, 2002 | 02:57 PM
Share
  #4  
Rocket's Avatar
Rocket
B*a*n*n*e*d
 
Joined: Mar 2002
Posts: 7,765
Likes: 1
Default Re: Re: (Rocket)
You can run stock LS's but you need to have the small end narrowed by 0.070". Also make sure the big end is round.
Reply
0
Old Aug 26, 2002 | 03:01 PM
Share
  #5  
BROOD's Avatar
BROOD
 
Joined: Jan 2002
Posts: 2,018
Likes: 1
From: North/West, IL
Default Re: Re: (Rocket)
and replace the oem rod bolts with ARP rod bolts
Reply
0
Old Aug 26, 2002 | 06:43 PM
Share
  #6  
shermanyang's Avatar
shermanyang
Honda-Tech Member
iTrader: (1)
 
Joined: Jun 2002
Posts: 3,279
Likes: 1
From: St.Paul, MN
Default Re: Re: (SLPR)
you might as well go with after market rods. saves you time and headache on the long run.
Reply
0
Old Aug 26, 2002 | 08:09 PM
Share
  #7  
Rocket's Avatar
Rocket
B*a*n*n*e*d
 
Joined: Mar 2002
Posts: 7,765
Likes: 1
Default Re: Re: (shermanyang)
Also run ACL bearings. They are much stronger and cost way less.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shotpeening(Ls/vtec build)
spoonef
All Motor / Naturally Aspirated
3
May 31, 2008 03:28 PM
LSVTEC, WITH CTR PISTONS,DO LS RODS NEED TO BE SHORTPEENE?
jdm mafia
Acura Integra
5
Dec 10, 2007 07:02 PM
old ass ls rods in ls vtec
lswantsvtec
Acura Integra
3
Jul 24, 2007 08:41 PM
LS Rods?
nomotor
All Motor / Naturally Aspirated
2
Apr 8, 2005 08:43 AM
rods in a ls/vtec... keep stock LS rods + ARP bolts or eagle?
skribblah
All Motor / Naturally Aspirated
63
Jul 11, 2003 10:29 AM
Back to Subforum
Tech / Misc
View Next Unread
where could this leak come from?




Advanced Search

All times are GMT -8. The time now is 03:22 AM.