ls girdle install ?
Thread Starter
Joined: Jan 2003
Posts: 75
Likes: 0
From: lusby, md, usa
ls girdle install ?
ok im putting a gsr girdle on my ls/vtec im just wonderin after i get it dowled and aligned will that mess up my bearing clearnces and fitment or will i be good with the stock main bearings still thx
New User
Joined: Mar 2001
Posts: 2,462
Likes: 0
From: Wayland, MI, US
Re: ls girdle install ? (black-hatch)
I don't see why it would. Doesn't the girdle go over the main caps anyway? You may have oil pan clearance problems, but I wouldn't think you'd have bearing troubles.
Joined: Jan 2002
Posts: 209
Likes: 0
From: ON, Canada
Re: ls girdle install ? (TimoneX)
^ what he said.
your bearings will remain the same as it does go above the main caps. a main cap needs to be filed down to make the girdle fit properly. and make sure to get the gsr windage tray, cap bolts (6?), oil pickup and oil pan. check the link below.
https://honda-tech.com/zerothread?id=263598
your bearings will remain the same as it does go above the main caps. a main cap needs to be filed down to make the girdle fit properly. and make sure to get the gsr windage tray, cap bolts (6?), oil pickup and oil pan. check the link below.
https://honda-tech.com/zerothread?id=263598
Thread
Thread Starter
Forum
Replies
Last Post
