I have a 99 civic hatch with a 94 ( jdm ) b18c engine and using the Skunk 2 conversion harness. I had an attempted theft a while ago, and my SAFC was stolen


I haven't driven the car in the few weeks and now that I start it up, I have a solid CEL. So i pulled the code and it's Code 3. Is that the MAF sensor?

How can I check the sensor it self? Would It have anything to do with my not having the SAFC anymore? The second part of the harness is wired to the ecu... but the part that connects to the unit itself was unplugged and taken. Nothing was cut or pulled.

 

bumo

 

IF I COULD REMEMBER CORRECTLY ITS A MAP SENSOR (ICOULD BE WRONG)

 

It really sounds like your MAP sensor isn't even connected to the ECU.

 

When your afc was stolen did you get all the wiring back the way it should be? That may be the biggest cause of your problems.

 

yeah, well they just cut the harness off at the plug before the second part of the harness that wires to the ecu. I'm going to recheck all the connections and see. It doesn't look like it was yanked though :\