ok well...... my car is limp....... yes its sad, i tried viagra levitra, but all gave erections for over 4 hours so i had to stop......... but anyway...

i have these codes...
Intake Air Temp <-- not plugged up
Secondary O2 <-- not plugged up
Vtech Pressure Switch <-- working on plugging up
Map Sensor <--- dont know why.....

which of these is putting me into limp mode? or is it just more than 2 codes with throw you into limp stage or what?

<--- trying to learn

 

probably your O2 sensor...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bumpincivic20 &raquo;</TD></TR><TR><TD CLASS="quote">probably your O2 sensor...</TD></TR></TABLE>

 

wrong it revs to 5200 which is basically what it does with no vtec....... limp mode would be 4200 and running without a secondary o2 sensor wont do anything

 

wait, so you aren't in limp mode? if you can rev up to 5200 and nothing else, then i would say it is your vtec pressure switch, hook that back up. and be a little more clear, i thought you were in limp mode.

 

my car went into limp mode when my vtec ground wire came off if that helps at all