hey what wires would i tap into for a kill switch?
and could i use just a regular toggle switch?

 

I am assuming that you are talking about a ghetto alarm kill switch. I do it in 2 ways. I put a blown fuse in the fuse box under the hood and run a switch to the ecu fuse.Make sure you add a fuse into the wiring of this switch, but it will cut power to the ecu... THe blown fuse is there as a decoy. You can also put a switch going to the hot wire of your fuel pump. If you do that one, make sure that you hide the toggle switch very well. Look at your haynes manual to find out which is the hot wire.