k-series vs D-series
Thread Starter
Joined: Jun 2003
Posts: 2,153
Likes: 0
From: southern, california
Re: k-series vs D-series (dohcnotec)
dog and a popsicle hahaha well anyways im swapping a k20 into my 94 ex in the next month and i was wondering on the weight difference... i know a k weighs abouy 40lbs less than a b ...so im wondering if the weight would be similar to a d so i can adjust my suspension accordingly
Honda-Tech Member
Joined: Apr 2002
Posts: 7,574
Likes: 6
From: Cincinnati,, Oh
Re: k-series vs D-series (dohcnotec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcnotec »</TD></TR><TR><TD CLASS="quote">can I ask why you are comparing these two engines? Thats like comparing a dog and a popsickle.</TD></TR></TABLE>
LMAO
New sig. Thankyou.
LMAO
New sig. Thankyou.
Honda-Tech Member
Joined: Apr 2002
Posts: 7,574
Likes: 6
From: Cincinnati,, Oh
Re: k-series vs D-series (electric_)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by electric_ »</TD></TR><TR><TD CLASS="quote">hybrid-racing</TD></TR></TABLE>
Where are they located, their website is under construction. Phone#???
Where are they located, their website is under construction. Phone#???
Trending Topics
Joined: Apr 2003
Posts: 319
Likes: 0
From: USA
Re: k-series vs D-series (jdmsiR20)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmsiR20 »</TD></TR><TR><TD CLASS="quote">mind if i ask what kind of mounts you're using? and wiring for that matter too?</TD></TR></TABLE>
I'm currently doing the swap on a 92 hatch civic(CRV 2.4 block w/ type-s RSX head). But, on your second question: You just used the K motors wiring harness it's a one piece harness dicert to the PCM. However, a slight mod is needed. For the mounts, I'm currently working with a local cnc shop here in Seattle. For, the K series motors uses the subframe for susport. I will post the pic when done.
I'm currently doing the swap on a 92 hatch civic(CRV 2.4 block w/ type-s RSX head). But, on your second question: You just used the K motors wiring harness it's a one piece harness dicert to the PCM. However, a slight mod is needed. For the mounts, I'm currently working with a local cnc shop here in Seattle. For, the K series motors uses the subframe for susport. I will post the pic when done.
... just trying to get it clear that you're not one of those fake wannabees tryin to get some mad vTECH y0! 
Lover
Joined: Feb 2002
Posts: 1,777
Likes: 0
From: Jacksonville, FL, United States
Re: k-series vs D-series (dohcnotec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcnotec »</TD></TR><TR><TD CLASS="quote">can I ask why you are comparing these two engines? Thats like comparing a dog and a popsickle.</TD></TR></TABLE>
too funny!!
too funny!!
Thread
Thread Starter
Forum
Replies
Last Post
