installing shifter bushings?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Stockton, CA
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
installing shifter bushings?
i found my es shifter bushings hiding in my garage...i have a 00 si. i kinda know where the location of the bushings. im just wondering, what tools will i need. im short on tools so i need to know ahead of time so i can barrow from a friend. thanks.
#4
If I remember correctly, 10mm or 12mm socket plus ratchet and one or two socket extentions should be all you need! You only have to remove three bolts!
Good luck!
PS Some WD40 would be helpful on stuborn bolts!
Good luck!
PS Some WD40 would be helpful on stuborn bolts!
#5
Honda-Tech Member
Join Date: Jun 2003
Location: st.louis, mo, usa
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing shifter bushings? (doublejz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublejz »</TD></TR><TR><TD CLASS="quote">elbow grease, The stabalizer bar bushing is always fun to get in </TD></TR></TABLE>
very true
very true
Thread
Thread Starter
Forum
Replies
Last Post