i got a set of stock 310cc injectors from a 2000 audi a4 1.8t. My question is ,,the plugs look the same as on my 2000 ITR ..can i run these injectors or do they need a resistor box?

 

why do you want bigger injectors in the first place?

 

im building the motor..upgraded valvetrain,flat faced valves.skunk 2 stage 2 cams.2 mm headgasket.Eventually this winter im gonna build the bottom end with CTR pistons to get the compresion up alittle higher so i can run a bigger cam..Im figuring ill probly need larger injectors wont i?..You think im just gonna put 310cc injectors on a stock motor? what good would that do?

 

Measure the resistance with a volt meter. They should be in the 10-15 Ohm range. If they are lower, you need a resistor box to protect the ECU.

 

cool,im gonna go do that right now.I just got picked up a new voltmeter last week.Thanks for the advice man really.Most people on here just reply with smart *** **** thats no help at all.

 

i just tested the resistance.they read 15 ohms on the dot

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4doorekITR &raquo;</TD></TR><TR><TD CLASS="quote">i just tested the resistance.they read 15 ohms on the dot</TD></TR></TABLE>

You are good to go.