My #2 is leaking right where it enters the IM, what is the problem?? after i shut down it continues to leak until the fuel is out of the line and then its making a whistling sound. is the inject. cracked?
btw its a b18b with a skunk IM. can anybody help me, thanks in advance.

 

replace the o rings and be sure and coat them with oil prior to installation.

 

thanks shaundrake I appreciate the help, is there any tricks to this installation?

 

what kind of injectors are you running? check if the fuel rail bolts are torqued down

 

Go dealer and bought a set of injector seal from from them cost about $70 for all 4 injectors (this include o-ring on fuel rail, spacer, and o-ring on IM). This should solve your problem, and took about 30 min to get it done. Be sure to coated the o-ring with engine oil before install it on or else you going to crush the o-ring.