Is it impossible to put a K20A in a 1996 Integra GSR?
HT Order of Merit
Joined: Aug 2004
Posts: 6,953
Likes: 3
From: Connecticut
Re: Is it impossible to put a K20A in a 1996 Integra GSR? (RippleSound)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RippleSound »</TD></TR><TR><TD CLASS="quote">I am thinking of doing a Engine swap, from a B18 to K20A is it impossible?</TD></TR></TABLE>
Nope, just expensive. They make mount kits, linkage kits and wire-harnesses to make this a "bolt-in" affair. Not an easy task, but yes its very possible and has been done.
Nope, just expensive. They make mount kits, linkage kits and wire-harnesses to make this a "bolt-in" affair. Not an easy task, but yes its very possible and has been done.
Honda-Tech Member
Joined: Nov 2003
Posts: 3,711
Likes: 0
From: South Florida
My only reason for being against a K swap is because you cant have a/c and that a must in FL. if u ever get stuck in bumper to bumper traffic when its 90 degrees out its the worse feeleing ever.
Joined: Oct 2004
Posts: 403
Likes: 0
From: Troy, MI
Re: (Boostage)
check out k20a.org for all the info you need. Also you can retain your a/c and powersteering with the swap. Of course custom lines are in order for that. anyways go check out the site excellent k20 source.
Honda-Tech Member
Joined: Nov 2003
Posts: 3,711
Likes: 0
From: South Florida
Re: (aspec101)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aspec101 »</TD></TR><TR><TD CLASS="quote">check out k20a.org for all the info you need. Also you can retain your a/c and powersteering with the swap. Of course custom lines are in order for that. anyways go check out the site excellent k20 source.</TD></TR></TABLE> 
Thread
Thread Starter
Forum
Replies
Last Post
Kentagious
Acura Integra
29
Nov 21, 2007 03:17 PM
