Ignition coil
Thread Starter
Joined: Feb 2004
Posts: 2,331
Likes: 0
From: charleston, sc, usa
Ignition coil
I just got my new coil today for my 00 si and was wondering if theres any tips on how to install this. I plan on doin it tomorrow so any help would be appreciated.
thanks
thanks
Honda-Tech Member
Joined: Aug 2001
Posts: 1,152
Likes: 0
From: columbus of ohio
Re: Ignition coil (pacifico)
It's pretty straightforward. Just follow the instructions in the manual (Helms, Haynes) and it should be pretty easy. It would probably be easier if you took the distributor off the car.
Honda-Tech Member
Joined: Jun 2002
Posts: 3,830
Likes: 0
From: YEAH HO, FRISCO, NORCAL
Re: (pacifico)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pacifico »</TD></TR><TR><TD CLASS="quote">Do I have to worry about messing up the timing?</TD></TR></TABLE>
only if you take the distributor off the block
only if you take the distributor off the block
* B A N N E D *
Joined: Aug 2003
Posts: 2,360
Likes: 0
From: SD, ca, us
Re: (APEX CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by APEX CRX »</TD></TR><TR><TD CLASS="quote">
only if you take the distributor off the block</TD></TR></TABLE>
not even that.. the distributor only goes in 1 way...
when you open it all up....you will see 1 screws that holds it in.. and then you will see the positive and negative wires on it the just replace it
only if you take the distributor off the block</TD></TR></TABLE>
not even that.. the distributor only goes in 1 way...
when you open it all up....you will see 1 screws that holds it in.. and then you will see the positive and negative wires on it the just replace it
Thread
Thread Starter
Forum
Replies
Last Post