I adjust the a/f to oscilate in the 14.7 region with my emulator fully warmed up and up to temperature in open loop but it keeps changing after put in closed loop and burnt to a chip.
While emulating I put it in closed loop then it went up to 15.3-16.9, so I killed the engine and put it back to open loop and downloaded the program to emulator and it was good again at 14.7 region. Put it back to closed loop and emulated and it read in the 14.7 region unlike the 1st try. So I burnt the chip and now its freakin in the 15.5-16.9 region in closed loop. Why is this happening, this is the 2nd time I tried to fix this problem, im just going to leave it already.