Wellllll... not really made, more like modified a tool to make it work.



Gonna try it out next time, it should clear!

 

i have never had a problem with just a wrench and screwdriver

 

Well thats how I did them Saturday, this is all for the sake of an easy out.

 

an "easy out" ? i dont think i understood what you said?

 

Uh. Sometimes getting torque on the bolt with an open wrench while keeping the screwdriver steady is a pain.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Burke &raquo;</TD></TR><TR><TD CLASS="quote">i have never had a problem with just a wrench and screwdriver </TD></TR></TABLE>maybe you never had a problem because in your sig it says b18a(non vtec heads are much easier to do a valve adjustment on).

 

Here's one I made. I've been using it for 2 years with no problems. I used a 10mm socket, a 5/8" wrench, and a screwdriver. I hammered the socket into the wrench and then hammered the screwdriver into the socket.

 

Damn! There you go, finally a good use for a Standard Wrench! LOL

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dwnthehatch &raquo;</TD></TR><TR><TD CLASS="quote">


</TD></TR></TABLE>