( HOW TO ) tuning valves on b18c
Thread Starter
Joined: Nov 2003
Posts: 19
Likes: 0
From: oceanside, ca, USA
( HOW TO ) tuning valves on b18c1
I heard that when the camshafts are removed from the head the valves must be retuned, what is involved in this process
Modified by drivfastr at 8:19 PM 11/18/2003
Modified by drivfastr at 8:19 PM 11/18/2003
Joined: Oct 2002
Posts: 752
Likes: 0
From: Orland Park, Il, USA
Re: ( HOW TO ) tuning valves on b18c1 (drivfastr)
Honda-Tech Member
Joined: Jan 2003
Posts: 8,132
Likes: 5
Re: ( HOW TO ) tuning valves on b18c1 (drivfastr)
Probably you heard it's good to adjust your valve lash after you put it back together. If you're lucky and everything goes in perfect, MAYBE you just measure and it's OK.
If you have adjustable cam sprockets, adjust them by tuning on a dyno; but I suppose you can put them back in the same position as before you took it apart?
If you have adjustable cam sprockets, adjust them by tuning on a dyno; but I suppose you can put them back in the same position as before you took it apart?
Thread
Thread Starter
Forum
Replies
Last Post
fully ported b18 head,fresh b18c bare head,aem cam gears,loss motion ass,fresh valve job valves, and
b18sihatch
Classifieds: Forced Induction
2
May 10, 2007 07:46 PM
