How to keep flywheel still while removing it?
Thread Starter
Member
Joined: Nov 2000
Posts: 1,829
Likes: 0
From: www.boomslang.us
How to keep flywheel still while removing it?
I wish I had air tools right now. Is there any cheap way to keep the flywheel still so I can take it and the clutch off? Honda wants $120 bucks for their flywheel holder.
Honda-Tech Member
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Re: How to keep flywheel still while removing it? (Inlinefour)
just take a pry bar and put a bit of pressure on the back of the wheel. That's what I had to do the first time I took it off. Or you could use a 2x4 shortened and push it against the side of the wheel the wood won't mess up the wheel.
Honda-Tech Member
Joined: Dec 2000
Posts: 20,006
Likes: 3
From: Tampa, FL
Re: How to keep flywheel still while removing it? (advanracing62)
Stick a screw driver through one of the holes of the flywheel so that it hits the block and wont move. That or you can always hold the crank pully bolt with a big socket and breaker bar.....
Thread
Thread Starter
Forum
Replies
Last Post
Schultzie
Honda Civic / Del Sol (1992 - 2000)
8
Jan 16, 2008 09:41 AM
jdm_vtec
Honda Civic / Del Sol (1992 - 2000)
4
Feb 13, 2007 11:36 AM
