i bought some obd1 h22a 345 cc injectors.. is there anyway to make 100% sure thats what they are?


Modified by Timmay at 8:17 PM 5/16/2007

 

 

someone has to know this

 

the 345's are peak and hold. i dont know if they use the same plugs as the obd-o peak and holds that came in the civics and integras. find a plug off a obd-1 prelude and see if it matches your injectors. you could also send them to rc injectors to have them cleaned and see what they flow. just some ideas trying to help out

 

all obd1 plugs are the same

i didnt know if there was some sort of numbers to know or something

 

well that sucks. i dont think that they have any numbers on them. peak and hold take alot less ohm's or whatever its called to run them. is there anyway to check the resistance or something

 

i dont think they have any numbers to identify. peak and hold take less ohm's or whatever signal it is to drive it . is there anyway to check the resistance or something

 

sorry accidentaly sent it twice

 

well i had them checked for flow at a local place and they flowed 58.. i have no idea what that means lol

and i checked the ohlms and its 2.8 vs 12.4 of a regular civic one.. so i know they are low impedance like h22a/h23 but i want to make sure they are really h22a ones and not h23


Modified by Timmay at 8:17 PM 5/16/2007

 

anyone?