I've got my gearbox down and the case off and am looking at



I am trying to get the fricken diff out. How do I do it? This is from a b16 honda tranny.

 

PUll the gear sets/shift forks and then you can remove hte diff.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC &raquo;</TD></TR><TR><TD CLASS="quote">PUll the gear sets/shift forks and then you can remove hte diff.</TD></TR></TABLE>

I have to pull the forks?

 

Once the other **** is out it should just pull out by hand.

 

So what do I need to pull? Just the shafts and then the final drive will be sitting there, or do i need to unboplt that then also or what?

 

You need to pull out the whole gear assembly.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx &raquo;</TD></TR><TR><TD CLASS="quote">You need to pull out the whole gear assembly.</TD></TR></TABLE>

Any kind of guide on getting the shafts from the case once I have the forks pulled? I'm not sure how they'll be secured.

 

Just remove the forward and reverse gear change holders, and pull the gearsets and shift forks straight up.

The gearsets and shift forks come up as one assembly, but after that, the forks can fall wherever they want.

 

if my memory serves me correct didnt in vtec do a very good write up on this subject

 

That was mega easy! BUT, now I don't know how to break it down any farther!




Whats my next step?

^^Atheist btw

 

Since i was having a speedo problem, can anyone tell me from looking at it, doesn't it seem that I am missing the speedo drive gear completely?

 

You have to remove those bolts, the should be left hand threads. then your done.

 

What about the bearing, how do I get that sucka off

 

Question,

Can I use a stock speedo drive gear from a b16 with any differential?

 

The speedo drive gear is missing. The bearing should be removed with a puller however some can be removed with screwdrivers IF your careful. What I would like to know is where the drive gear is

edit- i'm 99% sure the drive gears are all the same. Is it a cable or hydro b16 tranny?