Hondata Experts, Please Help: Getting rid of sensor input
Thread Starter
Joined: Apr 2004
Posts: 45
Likes: 0
From: Upper Marlboro, Maryland, United States
Hondata Experts, Please Help: Getting rid of sensor input
OK, lucky me got a European spec P28 which I did not realize was messing up my OBD 1 b18c into '91 EF sedan swap.
This gave a code 13 as there is no PA sensor (atmoshperic sensor). Not a computer genius, I got Hondata put into it about 18 mos. ago and need a step by step cookbook order if somebody can help me do it. Everything else correct but of course have a bad idle and limp home mode with no VTEC - damn!
I lost the software some while ago and am waiting for Hondata to send me new, and can not figure out if I could do this with the Hondalogger download from their site (sounds like dog ate the homework, but swear its the truth).
Thanks if you all can manage!
This gave a code 13 as there is no PA sensor (atmoshperic sensor). Not a computer genius, I got Hondata put into it about 18 mos. ago and need a step by step cookbook order if somebody can help me do it. Everything else correct but of course have a bad idle and limp home mode with no VTEC - damn!
I lost the software some while ago and am waiting for Hondata to send me new, and can not figure out if I could do this with the Hondalogger download from their site (sounds like dog ate the homework, but swear its the truth).
Thanks if you all can manage!
Honda-Tech Member
Joined: Mar 2001
Posts: 2,708
Likes: 1
From: Phoenix, AZ, USA
Re: Hondata Experts, Please Help: Getting rid of sensor input (ruby civic II)
Do you just need a rom made for your hondata? If you have a chip burner, email me the specs and I'll make you a rom.
joe@locashracing.com
joe@locashracing.com
Thread
Thread Starter
Forum
Replies
Last Post