Honda b16a1 in a Mini Cooper
Thread Starter
Trial User
Joined: May 2016
Posts: 1
Likes: 0
Honda b16a1 in a Mini Cooper
Hi,
This has been asked before, I know that, but I have been unable to find a definitive answer to my specific question.
I've bought a Mini race car with the B16a already mounted (axles and everything fine). What I need to ask is what is the EASIEST and most cost effective way of connecting the engine to the ECU? The previous owner has cut the wire harness and left it in a complete mess. Since this is a race car I strictly speaking don't need the interior/lights part at all. Just the engine bit is what is needed.
Any suggestions?
This has been asked before, I know that, but I have been unable to find a definitive answer to my specific question.
I've bought a Mini race car with the B16a already mounted (axles and everything fine). What I need to ask is what is the EASIEST and most cost effective way of connecting the engine to the ECU? The previous owner has cut the wire harness and left it in a complete mess. Since this is a race car I strictly speaking don't need the interior/lights part at all. Just the engine bit is what is needed.
Any suggestions?
Fish Twig
Joined: Nov 2005
Posts: 15,554
Likes: 309
From: Still hunting that foo up there
Re: Honda b16a1 in a Mini Cooper
Its been done, there are kits, pricey...
If you want to do it yourself than you'll need both the Honda FSM and the Mini couper specific to your year FSM.
If you want to do it yourself than you'll need both the Honda FSM and the Mini couper specific to your year FSM.
Thread
Thread Starter
Forum
Replies
Last Post
cehcivic15
Honda Civic / Del Sol (1992 - 2000)
4
Dec 19, 2008 10:26 AM