Well I've concurred DOHC valve adjustments but when I took my valve cover off my D16Y7 things looked a bit tight under one cam. I have all the tools for b series adjustments, is there another tool that works around the rockers for SOHC wrench'n ?

Thanks





Modified by Resurgent at 12:58 PM 5/9/2003

 

dern it , wish I could change the topic viewed on the Tech folder - why would editing the topic be beneficial if you can't see it

Annnyway - bring on the D series Techs !!!

 

when i did a valve adj. on my d16y8, i just used the normal feeler gauge, a flathead screwdriver and (if i remember correctly) a 12mm wrench. its not hard at all. since you did one on your other car you already know the basics of how to do it.

 

Well I guess its possible, I really couldn't get the feeler gauges in between the rockers, and I do have the 10mm lock-nut wrench from snap-on - maybe I need to take another look. I took pics w/o the VC on but have no host .

Any other ideas are welcome and thanks fmax !

 

to host pics try http://www.imagestation.com/