hf and dx cranks.. Whats the difference
#1
Member
Thread Starter
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
hf and dx cranks.. Whats the difference
Anyone know what the difference is between the 88-91 crx dx and 88-91 crx hf crankshafts.. They have different part numbers but I dont see what the difference could be between them..
#2
Honda-Tech Member
Re: hf and dx cranks.. Whats the difference (tgreaves)
I know some year HF crankpulleys are smaller or lighter, forgot which, but it may be a different end bolt or end diameter or something to that effect?
#3
Member
Thread Starter
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: hf and dx cranks.. Whats the difference (owen_the_soyboy)
Hmm.. Im just trying to figure out if D15B2 rods and pistons will go into a D15B6(hf) block with the hf crank..
#4
D Tranny Guru
Re: hf and dx cranks.. Whats the difference (tgreaves)
won't work.
D15 16V uses 45mm rod bearings
HF uses 42mm rod bearings
Also the HF crank is lighter, doesn't have the counterweights.
D15 16V uses 45mm rod bearings
HF uses 42mm rod bearings
Also the HF crank is lighter, doesn't have the counterweights.
#7
Member
Thread Starter
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: hf and dx cranks.. Whats the difference (Mista Bone)
Well then the only difference between the b2 and b6 bare block is the engine code stamp on the outside of the block..
Thread
Thread Starter
Forum
Replies
Last Post
tgreaves
Honda CRX / EF Civic (1988 - 1991)
2
12-16-2003 01:59 PM