Help wiring a non Vtec with a Vtec

Reply Subscribe

Thread Tools

Search this Thread

Jul 3, 2007 | 08:35 AM

Ckramer

Thread Starter

Joined: Jun 2007

Posts: 7

Likes: 0

From: Massillon, Ohio, USA

Help wiring a non Vtec with a Vtec

I have a 94 Civic DX it had a 1.5 non Vtec I put a 1.6 Vtec head on it. I also put in a P28 ECU. It is not wired for Vtec can anyone help me wire it myself. I do not have a harness to work with.

Modified by Ckramer at 10:34 AM 7/3/2007

Jul 3, 2007 | 10:25 AM

That Guy 32

Joined: Jul 2007

Posts: 7

Likes: 0

From: Sin City, NV, USA

Re: Help wiring a non Vtec with a Vtec (Ckramer)

I'm not sure I understand. You don't have a harness, at all? If that's the case, then just buy a VTEC harness, they go for about 100$ here complete and uncut.

Otherwise, Google "how to wire vtec" and you'll find 943575438753948 pages that completely explain it with pictures.

Jul 3, 2007 | 11:49 AM

HondaPartsHero

Technical Hero

Joined: May 2002

Posts: 9,875

Likes: 35

From: Charlotte, NC, 28227

Re: Help wiring a non Vtec with a Vtec (That Guy 32)

Jul 3, 2007 | 12:17 PM

builthatch

MiG-21 superfan

Joined: Mar 2001

Posts: 8,628

Likes: 3

From: near the ocean, Moderator City, NJ

Re: Help wiring a non Vtec with a Vtec (Ckramer)

you simply have to worry about a4 and d6. you will also need obd1 pins and a plug that'll work for the vtec solenoid; alot of different sensors use this type of plug (2-wire idle air control valve, knock sensor, etc, etc) so someone should have it laying around for you to use...