Help with removal of pedal assembly

Reply Subscribe

Thread Tools

Search this Thread

Jul 14, 2003 | 07:01 PM

Bspec18

Thread Starter

Joined: Oct 2002

Posts: 1,177

Likes: 0

From: Iraq,AQ

Help with removal of pedal assembly

Im doing a auto to manual swap for my 96 teg. I got all the lines off and bolts. but having a little trouble pulling out the assembly? any advice ?

Jul 14, 2003 | 09:05 PM

Bspec18

Thread Starter

Joined: Oct 2002

Posts: 1,177

Likes: 0

From: Iraq,AQ

i got the assembly loose now but need advice how to pull it out... drop steering column ?

Jul 14, 2003 | 10:35 PM

salbaje

Honda-Tech Member

Joined: Dec 2001

Posts: 3,786

Likes: 0

From: NORCAL, CA, USA

Re: (Bspec18)

there is a spring holding it in place take it off and pull out

Jul 14, 2003 | 11:00 PM

4crx4me

Honda-Tech Member

Joined: May 2003

Posts: 2,329

Likes: 1

From: Greetings From Asbury Park,, NJ

Re: (Bspec18)

Not sure about removing the colum, but I know there's one bolt above the
pedal assy. that goes into a plate either right above or right below where the colum bolts to the dash. Don't know if that makes any sense.

Jul 14, 2003 | 11:18 PM

Bspec18

Thread Starter

Joined: Oct 2002

Posts: 1,177

Likes: 0

From: Iraq,AQ

Re: Help with removal of pedal assembly (Bspec18)

YES ! i got it out !!! took blood and sweat and a whole lot of WD-40, a back ache and neck pain but i finaly got it out !

It was one tough *** bolt on the brake pedal (looks as if it was welded) got that removed and the pedal assembly followed

thanx for the advice sabaje