hey guys i have a sleeved b16 a3 block and the old jdm b16 crx head, i over revved the thing to 13 and bent all the exhaust valves and broke all the guides the question is that i'm rebuilding the head because i spent a bunch to have it ported and when i call honda to order the guides they have different part numbers for the 95 del sol b16 and the 2000 si b16 and of couse they don't have the listing for my head cuz it was never built in the us, so will both these valve guides work are they just a dirrerent version or will they not fit in the head. any help is much apperictated

 

I would check with the machinist and see what they use.
13K
What is the casting number?


Modified by B and B at 5:31 PM 8/19/2008

 

you may want to look into a new head....lets just say that probably all the work you had done previoulsy is all ruined...it will cost more to fix the one you have now...13k??? are you nuts or did you miss a shift and dont have a rev limiter?