I bought these injectors from a member and was told they are RC750cc and would fit a 1998 Integra Type-R. They don't fit because of that little piece of plastic circled in the pictures.
Anyone know what injectors they are?
It says PKCX-750 on them.

 

Dont mean to be a dick but did you put them in upside down, that little plastic piece is the clip that the harnesses hook into

 

The connection on the harness does not have room for that little piece of plastic. It is a European ITR if that matters? The stock injector does not have that little plastic thing.

 

I am told they are injectors for a Prelude. I thought they would fit an ITR as well. Shouldn't Prelude injectors fit? I guess not.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by THEUSED &raquo;</TD></TR><TR><TD CLASS="quote">Dont mean to be a dick but did you put them in upside down, that little plastic piece is the clip that the harnesses hook into</TD></TR></TABLE>

Don't mean to be a dick, but did you look at his pictures?

Those look to be Precision injectors. They are not RC, but they are the same ones RC uses. RC removes that little tab, but it kooks to me like you will still need to wire OBD-1 '92-'95 injector connectors into your harness. What are you using to calibrate the fuel maps for the 750cc injectors?

 

Thanks.
They are RC injectors, though. It says RC on them.
I don't really want to modify the harness. I'll just sell them and buy injectors that fit right in. Unless I can just cut away that plastic piece, but that is probably not a good idea, they put it there for a reason, I think
I am using Überdata to tune it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim Truett &raquo;</TD></TR><TR><TD CLASS="quote">

Don't mean to be a dick, but did you look at his pictures?

Those look to be Precision injectors. They are not RC, but they are the same ones RC uses. RC removes that little tab, but it kooks to me like you will still need to wire OBD-1 '92-'95 injector connectors into your harness. What are you using to calibrate the fuel maps for the 750cc injectors?</TD></TR></TABLE>

those are not precision injectors and that little tab can be removed with a xacto knife and you will be fine nothing will harmed just make sure if they are a peak and hold injector you use a resistor box on them.