Help-Lucas Injector Seals
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 2,290
Likes: 0
From: Maui, Hawaii, United States
Help-Lucas Injector Seals
Hi, when I bought my lucas 440 injectors it came with no seals(the one that presses into the intake manifold. I bought 4 sets from napa for the 94 gsr and it fits in the manifold fine but the injectors will never fit into them. The seal supposed to go all the way up to the injector lip but the lip is too fat for the seal. What do I do?
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 2,290
Likes: 0
From: Maui, Hawaii, United States
Re: Help-Lucas Injector Seals (TurboTeG4)
The top of the injector is also having a hard time fitting into my venom fuel rail seems a little too big?????? 
But then again I didnt put lubricant
But then again I didnt put lubricant
Mad Scientist
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Re: Help-Lucas Injector Seals (TurboTeG4)
as far as the seals, you could just drill them bigger.
as far as the top, they should go in no problems, unless the injectors are for another car...
as far as the top, they should go in no problems, unless the injectors are for another car...
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 2,290
Likes: 0
From: Maui, Hawaii, United States
Re: Help-Lucas Injector Seals (TurboTeG4)
doesnt the rc injector seals fit?
Neva mind I just ordered the rc seals
Modified by TurboTeG4 at 10:45 PM 5/21/2004
Neva mind I just ordered the rc seals
Modified by TurboTeG4 at 10:45 PM 5/21/2004
Thread
Thread Starter
Forum
Replies
Last Post
RTW DC2R
Forced Induction
3
May 3, 2006 05:41 AM
