Last year I rebuild the engine on my JDM ITR (B18C), recently whilst tidying my garage I found these two items. I don't remember seeing them when I took my engine apart but I thought i'd ask if anyone recognises them, there's nothign else I can think they would be from.




Any idea?

 

Valvetrain, rear seal housing, oil pump dowel pin on right? On left I can't say.

 

Spare parts that you didnt need? Lol I have no idea.

 

I think its the cylinder heads guide pin/dowel? on the right

 

The dowel pin isn't one from the cylinder head / block mating, they were both definitely there during assembly.

What do you mean by "Valvetrain, rear seal housing" ?

Thanks guys.

 

Dowel pin, is that for the tranny to block?

 

looks like dowel pin for tranny to block and the thick spacer is for the bolt that goes through the bitch mount

 

Ahh that may make sense. The bitch mount as in the gear selector ?

 

no the bitch mount is the motor mount that bolts to the rack and pinion. and the T bracket slides onto it. that is the bitch mount

 

the dowel on the left is too small for tranny/ head. The cam caps have a couple of dowel pins and I think the rear main plate/housing has a couple too. THe real main housing is what the rear main seal installs into and is bolted to the block.

 

Thats not a pilot bushing is it? from the flywheel?
and a dowel pin for tranny to block?