Help Converting 9005 to Low Beam
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,247
Likes: 0
From: So Cal, CA, United States
I know how to do this but my question is how the hell do you remove those 2 notches. I have no access to a grinder or anything type of chisel tool. So what other stuff can I use to be able to remove the 2 notches inside the and shave off the outside???? I have tried using a nail filer and it doesn't work either Thanks for any help.
got some nail cutter?
those work wonderfuly well, should try it.
remember there are different style the long one and the folding one.
the folding obviously does not work. Only the long one w/ a small head to make the clerance to cut the two plastic thingy in the middle.
go nuts
those work wonderfuly well, should try it.
remember there are different style the long one and the folding one.
the folding obviously does not work. Only the long one w/ a small head to make the clerance to cut the two plastic thingy in the middle.
go nuts
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,247
Likes: 0
From: So Cal, CA, United States
Hehe no I don't have any sort of tools like that also. Is there anything else that would do it with ease without spending that much money???? Cuz this is just only a one timer I don't want to spend on something that I won't use often. Thanks for your help and any other help.
u mean u dont have a toe nail cutter? whoa? hehehe
i'm assuming u dont cut ur nails then eh??
lol
othere then the nail cutter thingy, i dont know what will be good enuff to cut those 2 plastic thingy?.
go to a nail shop and buy 1?
3-6 buck?
hheheh just a suggestion.
i'm assuming u dont cut ur nails then eh??
lol
othere then the nail cutter thingy, i dont know what will be good enuff to cut those 2 plastic thingy?.
go to a nail shop and buy 1?
3-6 buck?
hheheh just a suggestion.
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,247
Likes: 0
From: So Cal, CA, United States
Lol no, what I meant was I only have the folding nail cutter. I guess I gotta go look for the long one don't even know how it look. All the nail cutter I see and have used are just the folding one. Thanks for your help.
Trending Topics
I actually use a generic utility (stanley) knife.. rather than actually trying to cut it, stick the blade in there and kinda pry with it against the side housing... Worked the best for me!
I have used my girlfriend's mother's Dremmel so many times this year, I consider it adopted.
Sure does make EVERY project seem easier. Plus it's FREE!
My recommendation: get a girlfriend, raid her parent's garage when you need stuff.
Sure does make EVERY project seem easier. Plus it's FREE!
My recommendation: get a girlfriend, raid her parent's garage when you need stuff.
Thread
Thread Starter
Forum
Replies
Last Post



