I have an d15b2, with a PM5 ecu that cotinues to throw code 10 - Air IntakeTemperature. I have replaced the sensor. Cleaned all wiring and conectors. I can't figure it out?? Help before I get the sledge hammer out!!

 

when was the last time you changed or cleaned your air filter, i had this problem and changed the sensor, still had the problem the until i replaced my air filter. the dirty filter was supposly making the sensor dirty. try that and see........if not get a sledge out beat your engine and buy a Bseries

 

Have you checked the wires for shorts/breaks??? If not get a digital multlimeter and continuity test both wires...

 

what if you only get this in high rpms...like 6.5k or so? this is really buggin me!