Does anyone have a good tech thread on how this is done or post up a pick of where the adjustment is done i am assuming it is the silver screw that is comming stait out of the top of the regulator but i just want to make sure befor i go and install all this stuff and it doesnt run right. any help would be great thanks

 

have you tried contacting aem's tech dept?

310-484-2322

 

no i havent, im just lookin for a quick answer

 

Yep just loosen the jam nut on the top of the regulator and turn the socket head adjustment in and out for adjustment and tighten the nut back down. Screw it in for more pressure and out for less.