have question about vtec pressure switch need help quick as possible.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 39
Likes: 0
From: milf town nj
have question about vtec pressure switch need help quick as possible.
hey guys i have a 95 civic coupe dx with a ls motor connerecently drop the motor out and my build motor with a new type r head. the vtec pressure switch has to pins. how do i wire it to connector d6 with two wire need advice first time wireing a pressure vtec. did the rest but the pressure switch. and pics or any info will be very helpfull
Honda-Tech Member
Joined: Jul 2001
Posts: 1,577
Likes: 0
Re: have question about vtec pressure switch need help quick as possible. (kbr56)
just did mine yesterday
if i remember right it has 2 wires.. Blue/Black and Black right?
Black is ground so dont' worry about it.. you just need to wire the Blue/Black to the proper ECU pin that's it
if i remember right it has 2 wires.. Blue/Black and Black right?
Black is ground so dont' worry about it.. you just need to wire the Blue/Black to the proper ECU pin that's it
Honda-Tech Member
Joined: Jan 2003
Posts: 8,132
Likes: 5
Re: have question about vtec pressure switch need help quick as possible. (PaChiLa Leader)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PaChiLa Leader »</TD></TR><TR><TD CLASS="quote">Black is ground so dont' worry about it...</TD></TR></TABLE>Better yet, black is ground so connect it to the ground point at the thermostat.
Thread
Thread Starter
Forum
Replies
Last Post