H22 swap with hondata / problems with ECU
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 3,737
Likes: 0
From: SacraMEGA, CA, USA
H22 swap with hondata / problems with ECU
I just did a swap into my integra, wiring is all good but I am wondering what may be wrong.
Here is the problem:
The motor cuts out at 6k right after vtec which engages at 5500.
Here is what I've got:
Hondata s200 brand new hasn't been tuned
I don't know the ECU which sucks- The stamp on the ECU has been taken off. Could this rev limit have something to do with the ECU? Or could it have something to do with the ECU not being vtec? I dunno what the ECU is. If this is really vauge I apologize, I am just very confused about this stuff. Thanks in advance!
Here is the problem:
The motor cuts out at 6k right after vtec which engages at 5500.
Here is what I've got:
Hondata s200 brand new hasn't been tuned
I don't know the ECU which sucks- The stamp on the ECU has been taken off. Could this rev limit have something to do with the ECU? Or could it have something to do with the ECU not being vtec? I dunno what the ECU is. If this is really vauge I apologize, I am just very confused about this stuff. Thanks in advance!
Honda-Tech Member
Joined: Mar 2001
Posts: 2,708
Likes: 1
From: Phoenix, AZ, USA
Re: H22 swap with hondata / problems with ECU (Lan)
More information needed.
Motor specs, what basemap, etc. There's a good chance that you should have the thing tuned before assuming something else is wrong.
Motor specs, what basemap, etc. There's a good chance that you should have the thing tuned before assuming something else is wrong.
Thread
Thread Starter
Forum
Replies
Last Post
vy3tnamezz
Engine Management and Tuning
7
Sep 20, 2009 10:43 AM