GSR internals in a LS, HELP

Reply Subscribe

Thread Tools

Search this Thread

Jul 13, 2005 | 01:22 PM

slambedcivic

Thread Starter

Honda-Tech Member

Joined: Dec 2002

Posts: 3,823

Likes: 0

From: Harbeson, De, USA

GSR internals in a LS, HELP

Will a GSR rotating assembly BOLT right into a LS block?

Jul 13, 2005 | 03:21 PM

gsrious

Honda-Tech Member

Joined: Dec 2004

Posts: 1,344

Likes: 0

From: Fresno

so you want to put in a gsr crank, gsr rods, and gsr pistons...

sure go ahead. there is no problem doing that.

Jul 13, 2005 | 08:28 PM

slambedcivic

Thread Starter

Honda-Tech Member

Joined: Dec 2002

Posts: 3,823

Likes: 0

From: Harbeson, De, USA

Re: (gsrious)

stroke is also the same?

Jul 13, 2005 | 11:55 PM

WickedSol

Honda-Tech Member

Joined: Mar 2003

Posts: 112

Likes: 0

From: Milpitas, Ca

Re: (slambedcivic)

stroke will be the same as the rotating assembly you install...the block housings are the same size...be sure to hone your cylinder walls...

Jul 14, 2005 | 12:01 AM

gsrious

Honda-Tech Member

Joined: Dec 2004

Posts: 1,344

Likes: 0

From: Fresno

no no no... ls stroke is 89mm and gsr stroke is 87mm. that why i said you have to use gsr rods with a gsr crank or ls rods with an ls crank.

the piston the deck height on both are the same though.

Jul 14, 2005 | 12:54 AM

WickedSol

Honda-Tech Member

Joined: Mar 2003

Posts: 112

Likes: 0

From: Milpitas, Ca

Re: (gsrious)

eh? I was agreeing with you, GSRIOUS...if your installing a gsr rotating assembly into a ls block you will have a gsr stroke...if you throw a ls rotating assembly into a gsr block you'll have a ls stroke...