I have 1993 del sol with a tucked d16y8 and harness from rywire.com

I think im having an electrical issue. My problems are, 1.when the engine becomes warms up till fan kicks on, the engine revs good till I add a load like driving, acts like the fuel is starving. I turn it off turn it back on with gas it goes up the rpms till the computer senses its hot again and bogs out on a load or with throttle. The warmer the engine the worse it gets. 2. My drivers side low beam doest turn on, high beam works, turn signals are blinking fast. I bought a new drivers side head light harness thinking I fluffed the old one, I didnt extend any wires on the new one. 3. Im getting an extremely loud sucking noise from my intake... like really loud not normal at all. <-gotta check timing for that. And valve lash.

The reason why I think it is an electrical issue is because the low beam worked while I tapped the gas a few times just for a short amount of time till the light never came back on.

I 're checked my grounds 3 times. The rywire harness I did exactly how they said to install (milspec). Im getting no cel. Im gonna ground the cel wire to see if there are any hidden codes I may be missing but if I unplug a sensor ie map or iacv I get a code.

Somewhere I feel im not getting the propped voltage, I test the alternator and it is running strong, im gonna add a fpr gauge.

Im at a loss. Dropped so much $ I probably didnt need to and im ripping my hair out. Next shot is a good mechanic but im from mass and there are many dirty shops out here near the boston area that I dont know where to look.

 

I've switched computers too, I have a stock p28 and. P28 chipped with hondata s300. My s300 actually makes my car run rougher