Alright, so lately I've been unable to park in the garage, so I've just pulled the under-the hood ECU fuse. Last night I popped it out with a screw driver a little carelessly. Didn't think anything of it, until today on the freeway.
CEL light on, rev's slowly drop, sputter sputter, fuel pump goes off.
It's a code 0, which is the ECU itself, right?

So I put in a new fuse, still did it. I realized that the fuse had to be barely in, to make a connection. But the problem is it will eventually rattle out of place, and lose the connection.... sweet right? If I push it in, all the way, there is no connection. Push it in half way, there is. But bumps, and rattles will cause the fuse to move around, losing the connection for a second or two. And In some cases the connection will be completely lost.

What can I do about this, other than getting an entirely new under the hood fuse box.

I hate my car. Stupid little things.

TIA
-erik