I recently bought the Apexi N1 the fitment was fine with a few minor mods.. that was 3 months ago now I'm having an anoying problem the tip of the exhaust moves out after I drive my car and after a sits for a while the tip goes back in. And since the tip of the exhaust keeps moving in and out my bumper is starting to melt a bit any help or suggestion would be nice.. things I tried to resolve the problem changed all the rubber hangers and still no fix, and tried to re install the whole exhaust and same carp keeps happening.. HELP!!!!!!!!!!


Modified by Ebp00Si at 9:20 AM 1/28/2005

 

bump

 

some help.

 

It expands when it gets hot. Deal with it 'cause you can't change it.

You have to take that into account when you adjust the position of all the hanger brackets & stuff.

 

BUT WHY DIDN'T THE EXHAUST DO THAT PROBLEM I'M HAVING 4 MONTHS AGO.. WHY NOW? AND THANKS FOR THE RESPONSE

 

Hard to believe it didn't do that 4 months ago. I mean expanding. If the expansion didn't cause any trouble 4 months ago, then some part of the alignment or hangers or something must have changed.

Maybe a hanger towards the middle of the car has come unhooked? Then the far end levers up higher, closer to the bumper?

 

for a fact i know that the middle hanger isn't unhook i checked. thanks agian

 

I don't have a lip of either a aftermarket bumper its all stock. thanks for the advice off to the muffler shop i go.