ok, so i finished my swap two days ago. the motor likes to studder badly sometimes. the studdering goes away if i am at full throttle. i was also getting a cel after a while of driving. i checked and it was one flash, o2 sensor. the sensor is hooked up, the swap is a 95 ls into 92 vx. im using the ls o2 sensor too. help?


[Modified by blufke, 9:53 AM 8/15/2002]

 

So let's get this straight, you were getting a MIL code, but you're not now?

O2 sensors don't just fix themselves.

Code 1 = Primary 02 sensor.

 

ttt