Engine Stalls
Thread Starter
Honda-Tech Member
Joined: Sep 2005
Posts: 35
Likes: 0
From: Hawaii
Engine Stalls
I have a 1994 civic with a b16a SIR II motor. I just recently replaced my clutch & pressure plate (ACT street) and my distributor o-ring. Now, I've been experiencing some stalling problems. It usually happens when the weather is hot, and I've been driving for a while. The engine stalls when I'm just about to come to a stop. What could be the problem?
Thread Starter
Honda-Tech Member
Joined: Sep 2005
Posts: 35
Likes: 0
From: Hawaii
Re: Engine Stalls (rehab_this)
anybody?
Normally, it Idles at around 700-900rpm. When I slow down to a stop, and drop on the clutch, the rpm would fall below 500rpm, and then stall.
Possible an ignition timing issue? Vacuum leak? etc.?
Normally, it Idles at around 700-900rpm. When I slow down to a stop, and drop on the clutch, the rpm would fall below 500rpm, and then stall.
Possible an ignition timing issue? Vacuum leak? etc.?
Thread
Thread Starter
Forum
Replies
Last Post